//! Emitting binary x86 machine code.

use super::enc_tables::{needs_offset, needs_sib_byte};
use super::registers::RU;
use crate::binemit::{bad_encoding, CodeSink, Reloc};
use crate::ir::condcodes::{CondCode, FloatCC, IntCC};
use crate::ir::{Constant, Ebb, Function, Inst, InstructionData, JumpTable, Opcode, TrapCode};
use crate::isa::{RegUnit, StackBase, StackBaseMask, StackRef, TargetIsa};
use crate::regalloc::RegDiversions;

use cranelift_codegen_shared::isa::x86::EncodingBits;

include!(concat!(env!("OUT_DIR"), "/binemit-x86.rs"));

// Convert a stack base to the corresponding register.
fn stk_base(base: StackBase) -> RegUnit {
    let ru = match base {
        StackBase::SP => RU::rsp,
        StackBase::FP => RU::rbp,
        StackBase::Zone => unimplemented!(),
    };
    ru as RegUnit
}

// Mandatory prefix bytes for Mp* opcodes.
const PREFIX: [u8; 3] = [0x66, 0xf3, 0xf2];

// Second byte for three-byte opcodes for mm=0b10 and mm=0b11.
const OP3_BYTE2: [u8; 2] = [0x38, 0x3a];

// A REX prefix with no bits set: 0b0100WRXB.
const BASE_REX: u8 = 0b0100_0000;

// Create a single-register REX prefix, setting the B bit to bit 3 of the register.
// This is used for instructions that encode a register in the low 3 bits of the opcode and for
// instructions that use the ModR/M `reg` field for something else.
fn rex1(reg_b: RegUnit) -> u8 {
    let b = ((reg_b >> 3) & 1) as u8;
    BASE_REX | b
}

// Create a dual-register REX prefix, setting:
//
// REX.B = bit 3 of r/m register, or SIB base register when a SIB byte is present.
// REX.R = bit 3 of reg register.
fn rex2(rm: RegUnit, reg: RegUnit) -> u8 {
    let b = ((rm >> 3) & 1) as u8;
    let r = ((reg >> 3) & 1) as u8;
    BASE_REX | b | (r << 2)
}

// Create a three-register REX prefix, setting:
//
// REX.B = bit 3 of r/m register, or SIB base register when a SIB byte is present.
// REX.R = bit 3 of reg register.
// REX.X = bit 3 of SIB index register.
fn rex3(rm: RegUnit, reg: RegUnit, index: RegUnit) -> u8 {
    let b = ((rm >> 3) & 1) as u8;
    let r = ((reg >> 3) & 1) as u8;
    let x = ((index >> 3) & 1) as u8;
    BASE_REX | b | (x << 1) | (r << 2)
}

// Emit a REX prefix.
//
// The R, X, and B bits are computed from registers using the functions above. The W bit is
// extracted from `bits`.
fn rex_prefix<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(rex & 0xf8, BASE_REX);
    let w = EncodingBits::from(bits).rex_w();
    sink.put1(rex | (u8::from(w) << 3));
}

// Emit a single-byte opcode with no REX prefix.
fn put_op1<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x8f00, 0, "Invalid encoding bits for Op1*");
    debug_assert_eq!(rex, BASE_REX, "Invalid registers for REX-less Op1 encoding");
    sink.put1(bits as u8);
}

// Emit a single-byte opcode with REX prefix.
fn put_rexop1<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x0f00, 0, "Invalid encoding bits for Op1*");
    rex_prefix(bits, rex, sink);
    sink.put1(bits as u8);
}

// Emit two-byte opcode: 0F XX
fn put_op2<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x8f00, 0x0400, "Invalid encoding bits for Op2*");
    debug_assert_eq!(rex, BASE_REX, "Invalid registers for REX-less Op2 encoding");
    sink.put1(0x0f);
    sink.put1(bits as u8);
}

// Emit two-byte opcode: 0F XX with REX prefix.
fn put_rexop2<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x0f00, 0x0400, "Invalid encoding bits for RexOp2*");
    rex_prefix(bits, rex, sink);
    sink.put1(0x0f);
    sink.put1(bits as u8);
}

// Emit single-byte opcode with mandatory prefix.
fn put_mp1<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x8c00, 0, "Invalid encoding bits for Mp1*");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    debug_assert_eq!(rex, BASE_REX, "Invalid registers for REX-less Mp1 encoding");
    sink.put1(bits as u8);
}

// Emit single-byte opcode with mandatory prefix and REX.
fn put_rexmp1<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x0c00, 0, "Invalid encoding bits for Mp1*");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    rex_prefix(bits, rex, sink);
    sink.put1(bits as u8);
}

// Emit two-byte opcode (0F XX) with mandatory prefix.
fn put_mp2<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x8c00, 0x0400, "Invalid encoding bits for Mp2*");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    debug_assert_eq!(rex, BASE_REX, "Invalid registers for REX-less Mp2 encoding");
    sink.put1(0x0f);
    sink.put1(bits as u8);
}

// Emit two-byte opcode (0F XX) with mandatory prefix and REX.
fn put_rexmp2<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x0c00, 0x0400, "Invalid encoding bits for Mp2*");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    rex_prefix(bits, rex, sink);
    sink.put1(0x0f);
    sink.put1(bits as u8);
}

// Emit three-byte opcode (0F 3[8A] XX) with mandatory prefix.
fn put_mp3<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x8800, 0x0800, "Invalid encoding bits for Mp3*");
    debug_assert_eq!(rex, BASE_REX, "Invalid registers for REX-less Mp3 encoding");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    sink.put1(0x0f);
    sink.put1(OP3_BYTE2[(enc.mm() - 2) as usize]);
    sink.put1(bits as u8);
}

// Emit three-byte opcode (0F 3[8A] XX) with mandatory prefix and REX
fn put_rexmp3<CS: CodeSink + ?Sized>(bits: u16, rex: u8, sink: &mut CS) {
    debug_assert_eq!(bits & 0x0800, 0x0800, "Invalid encoding bits for Mp3*");
    let enc = EncodingBits::from(bits);
    sink.put1(PREFIX[(enc.pp() - 1) as usize]);
    rex_prefix(bits, rex, sink);
    sink.put1(0x0f);
    sink.put1(OP3_BYTE2[(enc.mm() - 2) as usize]);
    sink.put1(bits as u8);
}

/// Emit a ModR/M byte for reg-reg operands.
fn modrm_rr<CS: CodeSink + ?Sized>(rm: RegUnit, reg: RegUnit, sink: &mut CS) {
    let reg = reg as u8 & 7;
    let rm = rm as u8 & 7;
    let mut b = 0b11000000;
    b |= reg << 3;
    b |= rm;
    sink.put1(b);
}

/// Emit a ModR/M byte where the reg bits are part of the opcode.
fn modrm_r_bits<CS: CodeSink + ?Sized>(rm: RegUnit, bits: u16, sink: &mut CS) {
    let reg = (bits >> 12) as u8 & 7;
    let rm = rm as u8 & 7;
    let mut b = 0b11000000;
    b |= reg << 3;
    b |= rm;
    sink.put1(b);
}

/// Emit a mode 00 ModR/M byte. This is a register-indirect addressing mode with no offset.
/// Registers %rsp and %rbp are invalid for `rm`, %rsp indicates a SIB byte, and %rbp indicates an
/// absolute immediate 32-bit address.
fn modrm_rm<CS: CodeSink + ?Sized>(rm: RegUnit, reg: RegUnit, sink: &mut CS) {
    let reg = reg as u8 & 7;
    let rm = rm as u8 & 7;
    let mut b = 0b00000000;
    b |= reg << 3;
    b |= rm;
    sink.put1(b);
}

/// Emit a mode 00 Mod/RM byte, with a rip-relative displacement in 64-bit mode. Effective address
/// is calculated by adding displacement to 64-bit rip of next instruction. See intel Sw dev manual
/// section 2.2.1.6.
fn modrm_riprel<CS: CodeSink + ?Sized>(reg: RegUnit, sink: &mut CS) {
    modrm_rm(0b101, reg, sink)
}

/// Emit a mode 01 ModR/M byte. This is a register-indirect addressing mode with 8-bit
/// displacement.
/// Register %rsp is invalid for `rm`. It indicates the presence of a SIB byte.
fn modrm_disp8<CS: CodeSink + ?Sized>(rm: RegUnit, reg: RegUnit, sink: &mut CS) {
    let reg = reg as u8 & 7;
    let rm = rm as u8 & 7;
    let mut b = 0b01000000;
    b |= reg << 3;
    b |= rm;
    sink.put1(b);
}

/// Emit a mode 10 ModR/M byte. This is a register-indirect addressing mode with 32-bit
/// displacement.
/// Register %rsp is invalid for `rm`. It indicates the presence of a SIB byte.
fn modrm_disp32<CS: CodeSink + ?Sized>(rm: RegUnit, reg: RegUnit, sink: &mut CS) {
    let reg = reg as u8 & 7;
    let rm = rm as u8 & 7;
    let mut b = 0b10000000;
    b |= reg << 3;
    b |= rm;
    sink.put1(b);
}

/// Emit a mode 00 ModR/M with a 100 RM indicating a SIB byte is present.
fn modrm_sib<CS: CodeSink + ?Sized>(reg: RegUnit, sink: &mut CS) {
    modrm_rm(0b100, reg, sink);
}

/// Emit a mode 01 ModR/M with a 100 RM indicating a SIB byte and 8-bit
/// displacement are present.
fn modrm_sib_disp8<CS: CodeSink + ?Sized>(reg: RegUnit, sink: &mut CS) {
    modrm_disp8(0b100, reg, sink);
}

/// Emit a mode 10 ModR/M with a 100 RM indicating a SIB byte and 32-bit
/// displacement are present.
fn modrm_sib_disp32<CS: CodeSink + ?Sized>(reg: RegUnit, sink: &mut CS) {
    modrm_disp32(0b100, reg, sink);
}

/// Emit a SIB byte with a base register and no scale+index.
fn sib_noindex<CS: CodeSink + ?Sized>(base: RegUnit, sink: &mut CS) {
    let base = base as u8 & 7;
    // SIB        SS_III_BBB.
    let mut b = 0b00_100_000;
    b |= base;
    sink.put1(b);
}

/// Emit a SIB byte with a scale, base, and index.
fn sib<CS: CodeSink + ?Sized>(scale: u8, index: RegUnit, base: RegUnit, sink: &mut CS) {
    // SIB        SS_III_BBB.
    debug_assert_eq!(scale & !0x03, 0, "Scale out of range");
    let scale = scale & 3;
    let index = index as u8 & 7;
    let base = base as u8 & 7;
    let b: u8 = (scale << 6) | (index << 3) | base;
    sink.put1(b);
}

/// Get the low 4 bits of an opcode for an integer condition code.
///
/// Add this offset to a base opcode for:
///
/// ---- 0x70: Short conditional branch.
/// 0x0f 0x80: Long conditional branch.
/// 0x0f 0x90: SetCC.
///
fn icc2opc(cond: IntCC) -> u16 {
    use crate::ir::condcodes::IntCC::*;
    match cond {
        Overflow => 0x0,
        NotOverflow => 0x1,
        UnsignedLessThan => 0x2,
        UnsignedGreaterThanOrEqual => 0x3,
        Equal => 0x4,
        NotEqual => 0x5,
        UnsignedLessThanOrEqual => 0x6,
        UnsignedGreaterThan => 0x7,
        // 0x8 = Sign.
        // 0x9 = !Sign.
        // 0xa = Parity even.
        // 0xb = Parity odd.
        SignedLessThan => 0xc,
        SignedGreaterThanOrEqual => 0xd,
        SignedLessThanOrEqual => 0xe,
        SignedGreaterThan => 0xf,
    }
}

/// Get the low 4 bits of an opcode for a floating point condition code.
///
/// The ucomiss/ucomisd instructions set the FLAGS bits CF/PF/CF like this:
///
///    ZPC OSA
/// UN 111 000
/// GT 000 000
/// LT 001 000
/// EQ 100 000
///
/// Not all floating point condition codes are supported.
fn fcc2opc(cond: FloatCC) -> u16 {
    use crate::ir::condcodes::FloatCC::*;
    match cond {
        Ordered                    => 0xb, // EQ|LT|GT => *np (P=0)
        Unordered                  => 0xa, // UN       => *p  (P=1)
        OrderedNotEqual            => 0x5, // LT|GT    => *ne (Z=0),
        UnorderedOrEqual           => 0x4, // UN|EQ    => *e  (Z=1)
        GreaterThan                => 0x7, // GT       => *a  (C=0&Z=0)
        GreaterThanOrEqual         => 0x3, // GT|EQ    => *ae (C=0)
        UnorderedOrLessThan        => 0x2, // UN|LT    => *b  (C=1)
        UnorderedOrLessThanOrEqual => 0x6, // UN|LT|EQ => *be (Z=1|C=1)
        Equal |                            // EQ
        NotEqual |                         // UN|LT|GT
        LessThan |                         // LT
        LessThanOrEqual |                  // LT|EQ
        UnorderedOrGreaterThan |           // UN|GT
        UnorderedOrGreaterThanOrEqual      // UN|GT|EQ
        => panic!("{} not supported", cond),
    }
}

/// Emit a single-byte branch displacement to `destination`.
fn disp1<CS: CodeSink + ?Sized>(destination: Ebb, func: &Function, sink: &mut CS) {
    let delta = func.offsets[destination].wrapping_sub(sink.offset() + 1);
    sink.put1(delta as u8);
}

/// Emit a four-byte branch displacement to `destination`.
fn disp4<CS: CodeSink + ?Sized>(destination: Ebb, func: &Function, sink: &mut CS) {
    let delta = func.offsets[destination].wrapping_sub(sink.offset() + 4);
    sink.put4(delta);
}

/// Emit a four-byte displacement to jump table `jt`.
fn jt_disp4<CS: CodeSink + ?Sized>(jt: JumpTable, func: &Function, sink: &mut CS) {
    let delta = func.jt_offsets[jt].wrapping_sub(sink.offset() + 4);
    sink.put4(delta);
    sink.reloc_jt(Reloc::X86PCRelRodata4, jt);
}

/// Emit a four-byte displacement to `constant`.
fn const_disp4<CS: CodeSink + ?Sized>(constant: Constant, func: &Function, sink: &mut CS) {
    let offset = func.dfg.constants.get_offset(constant);
    let delta = offset.wrapping_sub(sink.offset() + 4);
    sink.put4(delta);
    sink.reloc_constant(Reloc::X86PCRelRodata4, offset);
}